Belden 1615BM Cable 18 AWG 1 Coax RG-6 CATV Messenger FPE Insulation Cable

Belden 1615BM Cable 18 AWG 1 Coax RG-6 CATV Messenger FPE Insulation Cable

Description:
• Series 6, 18 AWG solid .040" bare copper-covered steel conductor(s), gas-injected foam polyethylene insulation, Duobond® III (outer tape bonded to jacket) + aluminum braid shield (77% coverage), PVC jacket.

Insulation:
• Material: Gas-injected FPE - Foam Polyethylene
• Dia. (in.): 0.180

Outer Jacket:
• Material: PVC - Polyvinyl Chloride

Messenger:
• Messenger Diameter: 0.051 in.
• Messenger Material: Galvanized Steel

Mechnical Characteristics (Overall):
• Operating Temperature Range: -40°C To +80°C
• Non-UL Temperature Rating: 80°C
• Bulk Cable Weight: 43 lbs/1000 ft.
• Max. Recommended Pulling Tension: 110 lbs.
• Min. Bend Radius/Minor Axis: 3 in.

Applicable Specifications and Agency Compliance (Overall):
Applicable Standards & Environmental Programs:
• EU Directive 2011/65/EU (ROHS II): Yes
• EU CE Mark: No
• EU Directive 2000/53/EC (ELV): Yes
• EU Directive 2002/95/EC (RoHS): Yes
• EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004
• EU Directive 2002/96/EC (WEEE): Yes
• EU Directive 2003/11/EC (BFR): Yes
• CA Prop 65 (CJ for Wire & Cable): Yes
• MII Order #39 (China RoHS): Yes
• Series Type: Series 6

Electrical Characteristics (Overall):
• Nom. Characteristic Impedance (Ohm): 75.000
• Nom. Inductance (μH/ft): 0.097
• Nom. Capacitance Conductor to Shield (pF/ft): 16.2
• Nominal Velocity of Propagation VP (%): 83
• Nominal Delay (ns/ft): 1.2
• Nom. Conductor DCR @ 20°C (Ohm/1000 ft): 28.0
• Nom. Outer Shield DCR @ 20°C (Ohm/1000 ft): 5.6
• Max.Operating Voltage - UL: 350 V RMS
• Sweep Testing: 5 MHz - 1 GHz

Plenum/Non-Plenum:
• Plenum (Y/N): No

Benefits:
• All cables rated to 1 GHz
• Crush resistant dielectric material
• Corrosion resistant center conductor

Features:
• Shield options: dual shield (60% braid), tri-shield (77%), or quad shield (60%/40%)
• Indoor (CM, CMR, CMP), messengered and burial versions
• Meets or exceeds applicable ANSI/SCTE standards for drop coaxial cable