Home / Tray Cable / Tray Cable
Tray Cable

Tray Cable

What are Tray Cable CableS?

The Tray cable VNTC, VFD and festoon are a wide range of industrial power cables or multi-conductor control cable rated at 600 volts and are suited for use in cable trays, racetracks, conduits and outdoor use in applications where a messenger wire is supported. They are also used in industrial applications to power AC motors since they offer better control than DC drives and still improving the motor’s efficiency. These are designed and well suited for tough industrial applications.
The acronym VNTC stands for Vinyl Nylon Tray Cable while VFD stands for Variable Frequency Drive. Whenever you are in need of cable trays and variable frequency drives applications then these are the right cables suited for you. All these cables are readily available at Nassau Electrical a renowned supplier of cable and wire products. On this article I will share with some of the unique features of the tray cable VNTC, VFD and Festoon and why they should be your preferred options in the various fields of application.

VNTC Cable

START HERE TO FIND THE RIGHT CABLE FOR YOUR PROJECT:

Copper Control Cable
Copper Control Cable Conduits, duct, tray or tracks, can be used for direct burial, Indoors and outdoors, approved for hazardous... see options
Copper Tray Cable
Copper Tray Cable Can be found in utility substations and generating stations as well as in industrial buildings, mills, fact... see options
Low Voltage Tray Cable
Low Voltage Tray Cable In conduit, duct, free air, raceways and direct burial, primary installations include cable trays, and outd... see options
Low Volt Onshore and Offshore Cable
Low Volt Onshore and Offshore Cable It is designed for installation applications of the harsh offshore environmental conditions. Thanks to the ... see options
PLTC Tray Cable
PLTC Tray Cable For use in cable tray, raceway and conduit. For use with audio, intercom, control, energy management, and a... see options
Tray Cable
Tray Cable For use in power, control and lighting circuits in a broad range of commerical and industrial applications. see options
Tray Cable TC-ER
Tray Cable TC-ER For use in power, control and lighting circuits in a broad range of commerical and industrial applications. see options
VFD Cable
VFD Cable The type of material used for the insulation is flame retardant with is XLPE material. see options
XHHW and Cathodic Protection Cable and UL Cable
XHHW and Cathodic Protection Cable and UL Cable Used as internal wiring for appliances and electrical and electronic equipment. Also used for wiring and ca... see options
ASD-VFD Tray Cable Shielded
ASD-VFD Tray Cable Shielded Serve in punishing conditions and is applied in various industrial fields and marine offshore drills. see options
PVC Flat Festoon Cable
PVC Flat Festoon Cable These cables are designed to convey electrical energy and control to cranes, hoists, or any equipment which... see options
Service Wire Jacketed MC Connectors ASD/VFD Patented for use with ServiceDrive and ServiceDrive Plus Cable Systems
Service Wire Jacketed MC Connectors ASD/VFD Patented for use with ServiceDrive and ServiceDrive Plus Cable Systems Designed exclusively to terminate ASD/VFD cables in control centers, panel boards, junction boxes and motor... see options
Service Wire Tray Cable Connectors Patented for use with ServiceDrive and ServiceDrive Plus Cable Systems
Service Wire Tray Cable Connectors Patented for use with ServiceDrive and ServiceDrive Plus Cable Systems Designed exclusively to terminate ASD/VFD cables in control centers, panel boards, junction boxes and motor... see options
THHN Tray Cable Shielded TYPE TC
16 Gauge Shielded VNTC Tray Cable UL Type TC-ER Copper Wire 600V

Suitable for use in Power, control, signal, communication and lighting circuits. Approved for use in racewa...

see options
THHN Tray Cable Unshielded Type TC
THHN Tray Cable Unshielded Type TC Suitable for use in conduit, duct, tray or rack. It may be used in free air when supported by a messenger o... see options
VNTC Type TC Tray Cable 600V
VNTC Type TC Tray Cable 600V Can be utilized as a part of direct internment applications, free air, or introduced in raceways or course. see options
VNTC Unshielded 10 AWG THWN or THHN
VNTC Unshielded 10 AWG THWN or THHN Suitable for installation in cable trays and troughs can be installed in air, ducts or conduitsremote contr... see options
VNTC Unshielded 12 AWG THWN or THHN
VNTC Unshielded 12 AWG THWN or THHN Suitable for installation in cable trays and troughs can be installed in air, ducts or conduitsremote contr... see options
VNTC Unshielded 14 AWG THWN or THHN
VNTC Unshielded 14 AWG THWN or THHN Suitable for installation in cable trays and troughs can be installed in air, ducts or conduitsremote contr... see options
VNTC Unshielded 16 AWG TFN
VNTC Unshielded 16 AWG TFN As flame-retardant multi-conductor control, signal or power cables rated 600 volts, 90 Deg. C. in dry locat... see options
XHHW HYP Tray Cable-With Hypalon Jacket Type TC
XHHW HYP Tray Cable-With Hypalon Jacket Type TC UL listed and OSHA acceptable.Recognized for use in Class 1, Division 2 hazardous locations and for install... see options
XHHW-2 Tray Cable Unshielded TYPE TC
XHHW-2 Tray Cable Unshielded TYPE TC UL listed and OSHA acceptable.Recognized for use in Class 1, Division 2 hazardous locations and for install... see options
Flat PVC Yellow Festoon Cable 600V
Flat PVC Yellow Festoon Cable 600V For use in high temperature thermocouple extension applications in caustic environments where protection fr... see options

 

These cables are available in different types of insulation, including THHN, THWN, XLPO, EPR, and XLPE. Some of the most common jacket materials include PVC and CPE. The most prominent benefit of these cables is their all-purpose use. Tray cables are flexible and relatively easy to maintain. Their wide price range allows choosing cables for every budget depending on the insulation type. Tray cables come in both 300v and 600v voltage range.

Types of tray cables available in Nassau National Cable include shielded cable, EPR/CPE, and THHN/PVC. The company also distributes cables produced by LAPP that use patented technologies to provide superior solutions.

 

Shielded tray cable is used in control circuits, power, and signal systems. VFD, a subtype of shielded cables, is used in motor drives, radar units, and information systems.

EPR/CPE is one of the most expensive types of tray cables of Class 1 Division 2. It has ethylene-propylene rubber insulation and a chlorinated polyethylene jacket. Typical uses of these cables include mining, oil fields, and refineries. Cables can be used in dangerous conditions with the possibility of explosions.

THHN/PVC is a budget-friendly type of tray cables suitable for mining and industrial applications. It belongs to Class 1 Division 2 as well. However, the cable performs slightly worse in hot temperatures because of the thermoplastic jacket. The cable is equipped with thermoplastic high heat-resistant nylon insulation and a polyvinyl chloride jacket.

MOST PURCHASED Tray Cable