The Gepco® Brand HydroBloc™ shielded/unshielded speaker and control cables are ideal for permanent installation in wet locations. The conductors consist of stranded, bare copper conductors that are insulated with a PVC insulation compound. The outer jacket is extruded from a low-friction PVC that is easy to install and pull through conduit. Gepco Brand shielded and unshielded speaker and control cables are available in 20 and 22 AWG. With advanced water-blocked construction, the HydroBloc line utilizes a two-ply water-blocking tape and waterswellable fillers to prevent transverse and longitudinal water ingress.
Features & Benefits:
• Advanced Water-Blocked Construction
• Sunlight- and Moisture-Resistant Jacket
• Cables Comply with TIA-455-82-B Water Penetration Test
• Ripcord for Ease of Stripping Jacket
• Bare Copper Conductors
• Superior PVC Insulation
• 20 and 22 AWG Versions
• UL Rated
Applications:
• In Wet Locations Inside Conduit
• Indoor/Outdoor Use
• Speaker Interconnections
• General Purpose Audio
• Communications & Power-Limited Circuits
| technical specification: | |
| conductor | 22 awg solid bc |
| # of cond. | 4 (2 shielded, 2 unshielded) |
| nominal od | 0.237“(6.02 mm) |
| insulation/color code | PVC, 0.010” (0.254 mm)/Black, Red, Green, White |
| shield | 100% foil |
| drain wire | 24 awg solid tc |
| jacket (type, colors) | pvc, gray |
| ul type | cm/cl3 |
| approx. weight | 29 lbs/Mft (43 kg/km) |
| general cable and gepco brand part number | hbs2240 |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.