Technical Data:
• Bio-oil resistant, abrasion resistant special control cable in adapted to DIN VDE 0285-525-1 / DIN EN 50525-1

Temperature Range:
• Flexing -20°C to +80°C
• Fixed installation -40°C to +80°C

Nominal Voltage:
• U₀/U 300/500 V

Test Voltage:
• 3000 V

Insulation Resistance:
• Min. 20 MOhm x km

Coupling Resistance:
• Max. 250 Ohm/km

Minimum Bending Radius:
• Flexing 20x cable Ø
• Fixed installation 6x cable Ø

Radiation Resistance:
• Up to 100x10⁶cJ/kg (up to 100 Mrad)

Cable Structure:
• Bare copper-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5 
• Core insualtion of special polymer
• Core identification to DIN VDE 0293 black cores with continuous white numbering
• GN-YE conductor, 3 cores and above in the outer layer
• Cores stranded in layers with optimal lay-length
• Special inner sheath
• Tinned copper braided screen,approx. 85% coverage
• Core wrapping of fleece guarantees easy cable stripping
• Outer sheath of special polymer compound 
• Sheath colour dark green 
• With meter marking

Properties:
• Resistant to Bio-fuel (diesel and petrol), highly resistant to biologically decomposable oils, Oxygene, Ozone, Hydrolysis and Microbes
• Low adhesion

Note:
• G = with green-yellow conductor 
• X = without green-yellow conductor (OZ) 
• For the critical applications we advise for consultation
• AWG sizes are approximate equivalent values. The actual cross-section is in mm². 
• Unscreened analogue type: BIOFLEX-500® -JZ

Application: 
• HELUKABEL® BIOFLEX-500®-JZ-C is an extremely robust control cable with high abrasion and tear resistant properties. Due to its high resistance to Bio-fuel, Bio-oil and coolant emulsions. It is especially suited for use in the machine, tool making and plant industries as well as in the steel industry for difficult and problem areas. The inner sheaths of those cables raise the mecanical stress. The high flexibility of this cable type makes it quick and easy to install. Suitable for outdoor lying. These screened cables are particularly suitable for the interference-free transmission in instrumentation and control engineering applications (electromagnetic compatibillity). 1) For the critical applications we advise for consultation.
• EMC = Electromagnetic compatibillity
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.