Conductor: 2 AWG thru 1000 kcmil bare copper compact Class B strand 

Strand Shield: A thermoset semi-conducting strand shield is extruded over the conductor 

Insulation: Tree-Retardant Cross-linked Polyethylene (TRXLPE) 

Insulation Shield: 
• This consists of a semi-conducting thermosetting layer, applied in a triple extrusion process, plus a helically applied gapped copper tape 
• Color-coded: black, red or blue colored tape placed longitudinally under the copper tape shield

Ground (Bonding) Conductor: The conductor consists of one uninsulated stranded bare copper conductor 

Inner Jacket: Lead-free, flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black 

Armor: Aluminum Interlocked Armor (AIA) 

Overall Jacket: Lead-free, ACID-FLAME-CHECK ??® flameretardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), red 

Options: Galvanized Steel Interlocked Armor (GSIA) 

Applications: 
• For wiring in all hazardous locations when used with certified HL cable glands 
• For exposed and concealed wiring in dry, damp or wet locations 
• For use in ventilated, non-ventilated and laddertype cable trays in dry, damp or wet locations 
• For direct earth burial (with protection as required by inspection authority) 

Features: 
• Rated at 90?C wet or dry 
• Excellent crush, oil and chemical resistance 
• Provides long service life 
• Cost-effective alternative to installations in conduit 
• Meets cold bend and impact tests at -40?C 

Compliances: 
Industry Compliances: 
• CSA Standard C22.2 No. 131 and No. 174 
• CSA Standard C68.10 

Flame Test Compliances: 
• CSA FT1 and FT4 
• IEEE 383 (70,000 BTU/hr) 
• UL 1581 (70,000 BTU/hr) 
• IEEE 1202 (70,000 BTU/hr) CSA FT4 
• ICEA T-30-520 (70,000 BTU/hr) 
• ICEA T-29-520 (210,000 BTU/hr) 

Other Compliances: 
• Hazardous Location Rating: HL 
• EPA 40 CFR, Part 261 for leachable lead content per TCLP method 
• OSHA Acceptable 
• RoHS Compliant 

Packaging: 
• For Canadian customers, lengths are provided on returnable wood or steel reels that require a deposit. Extra charges apply for lagging, pulling eyes, paralleling and plexing 
• For U.S. customers, material cut to length and shipped on non-returnable wood reels, while lengths in excess of 10,000 lbs. are provided on returnable steel reels that require a deposit. Extra charges apply for cuts less than 1000 ft., lagging, pulling eyes, paralleling and plexing