Conductor: Tinned annealed stranded circular copper (STCC), IEC 60228 class 2

Insulation: EP-rubber, IEC 60092-360 (EPR)

Lay up / Shielding: Cores laid up in concentric layers

Inner covering: Flame retardant and halogen-free thermoset compound

Tape over inner covering: PET tape + rubberized Polyamide tape

Armour/screen: Two layers of tinned copper wire braid (double braid)

Tape over armour/screen: PET tape + rubberized Polyamide tape

Outer sheath: Flame retardant, halogen-free, mud and cold bend / cold impact resistant thermoset compound, SHF2 (IEC 60092-360)

Marking text: E.g. "meter" "year" DRAKA 01 RFOU 0,6/1KV P1/P8 3 x 150/70 mm2  IEC 60332-353 IEC 60332-3-22 ARCTIC GRADE Cold bend (-40 deg. C)/ Cold impact (-35 deg. C)

Manufacturing unit: DRAKA 01 = Draka Norsk Kabel.

Outer sheath colour: Black

Operating temperature: 90°C

Operating Voltage: 0,6/1(1,2)kV

Standards applied:
• IEC 60092-353 - Design
• IEC 60228 class 2 - Conductor
• IEC 60092-360 - Insulation
• IEC 60092-360 - Sheath
• IEC 60332-1-2 - Flame Retardant
• IEC 60332-3-22 - Flame Retardant
• IEC 60754-1,2 - Halogen Free
• IEC 61034-1,2 - Low Smoke
• CSA 22.2 0.3-01 (-40°C/-35°C) / IEC 60092-352 Annex E (-40°C/35°C) - Cold Bend / Cold Impact

Core Identification Power cables:
• Single core - Black -
• Two cores - Blue-Brown -
• Three cores - Brown-Black-Grey
• Four cores - Blue-Brown-Black-Grey
• Five cores - Blue-Brown-Black-Grey-Black
• Seven cores and above - White with black numbers -
• Two cores + earth (3G) - Yellow/green-Blue-Brown
• Three cores + earth (4G) - Yellow/green-Brown-Black-Grey
• Four cores + earth (5G) - Yellow/green-Blue-Brown-Black-Grey
• G / X in cable description - G = One of the cores are yellow/green - X = no yellow/green core -
• Core identification - to HD308S2 - and IEC 60445: Edition 5.0 2010-08 -

Description:
• RFOU 0.6/1kV 3X 150/75 P1/P8 Cold
• RFOU 0.6/1kV 4X 150/75 P1/P8 Cold
• RFOU 0.6/1kV 3X 185/95 P1/P8 Cold
• RFOU 0.6/1kV 4X 185/95 P1/P8 Cold
• RFOU 0.6/1kV 3X 240/120 P1/P8 Cold

Sheath Colour: BLACK

Application: Fixed installation for power,control and lighting in both EX- and safe areas, general purposes. For installation in areas exposed to MUD and drilling/cleaning fluids. Meets the OIL & mud resistance requirement in NEK 606. Meets the cold bend / cold impact requirement in CSA 22.2 0.3-0.1 and IEC 60092-350 clause 8.9 & Annex E at -40°C / -35°C.