Product Details

Technical Data: Special-PVC cable adapted to DIN VDE 0285-525-2-51 / DIN EN 50525-2-51

Temperature Range:
• Flexing -10°C to +80°C
• Fixed installation -40°C to +80°C

Nominal Voltage:
• For 1-core (LiYDY) 1200 V
• From 2-cores U0/U 300/500 V

Test Voltage:
• Core/core 4000 V
• Core/screen 2000 V

Breakdown Voltage: Min. 8000 V

Insulation Resistance: Min. 20 MOhm x km

Mutual Capacitance:
• Acc. to different cross sections
• Core/core approx. 150 nF/km
• Core/screen approx. 270 nF/km

Coupling Resistance: Max. 250 Ohm/km

Minimum Bending Radius:
• Flexing 10x cable Ø
• Fixed installation 5x cable Ø

Radiation Resistance: Up to 80x106 cJ/kg (up to 80 Mrad)

Cable Structure:
• Bare copper conductor, to ;DIN VDE 0295 cl.5, fine wire, ;BS 6360 cl.5, IEC 60228 cl.5
• Core insulation of special PVC ;compound type Z 7225
• Core identification to DIN VDE 0293 ;black cores with continuous white ;numbering
• Cores stranded in layers with ;optimal lay length
• Foil separator
• - For 1-core (LiYDY) ;copper screen of helically wound, ;approx. 85% coverage
• - From 2-cores ;tinned copper braided screening, ;approx. 85% coverage
• Outer sheath of special PVC ;compound type TM2 to ;DIN VDE 0207-363-4-1/DIN EN 50363-4-1
• Sheath colour: grey (RAL 7001)
• With meter marking

Properties:
• Extensively oil resistant, ;oil-/chemical resistance ;see "Technical Infromations"
• The materials used during manufacturing ;are cadmium-free, contain no silicone ;and are free from substances harmful ;to the wetting properties of lacquers

Tests:
• PVC self-extinguishing and flame retardant ;acc. to DIN VDE 0482-332-1-2, ;DIN EN 60332-1-2, IEC 60332-1-2 ;(equivalent DIN VDE 0472 part 804 ;test method B)

Note:
• x = without green-yellow conductor (OZ)
• Designation: LiYDY for 1-core cable (without VDE-REG-Nr.)
• Cleanroom qualification tested with analog type. Please note "cleanroom qualified" when ordering.
• AWG sizes are approximate equivalent values. The actual cross section is in mm².
• Unscreened analogue type: JZ-500

Application:
• For flexible use with free movement without tensile stress or forced movements in dry, moist and wet rooms but not in open air, as cable in the control and regulation technology, tool and machinery, in computer systems, as well as signal line in the electronic. A stabilizing foil separator between wire bound and braid reduces the outer diameter essentially and allows smaller bending radius, lower weight etc. The disturbance free transmission of signals and impulses is ensured due to the high degree of screening. This is an ideal disturbance-free cable for the above applications.
• EMC = Electromagnetic compatibility
• To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.