Product Details
Complete Cable: Lead-free cross-linked semi-conducting conductor shield, insulation and semi-conducting insulation shield are extruded over a solid or stranded aluminum conductor and cured in a single operation. Uncoated copper wires (helically applied), separator tape and overlaying black PVC jacket are applied over the cable core. These products meet the latest requirements of ANSI/ICEA S-97-682 and AEIC CS8 as applicable for Tree-Retardant Cross-linked Polyethylene(TRXLPE) insulated shielded power cable.
Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum.
Conductor Shield: Extruded lead-free semi-conducting thermosetting polymeric stress control layer.
Insulation: Extruded unfilled lead-free Tree-Retardant Cross-linked Polyethylene (TRXLPE).
Insulation Shield: Extruded lead-free semi-conducting thermosetting layer, clean and free stripping from insulation.
Copper Wire Shield: Helically applied annealed solid bare copper wires with a lapped non-metallic tape serving as a binder/separator.
Jacket: Black, non-conducting, sunlight-resistant Polyvinyl Chloride (PVC).
Features and Benefits:
• Lead-free environmentally friendly cable
• Triple-extruded for clean interfaces
• Dry nitrogen cure for enhanced performance
• Class 10,000 environment utilized for cable core material handling
• Excellent moisture resistance
• High dielectric strength
• Low dielectric loss
• Excellent resistance to water treeing
• Clean-stripping insulation shield
• Sunlight-resistant
Temperature Rating:
• Normal - 90°C
• Emergency* - 130°C
• Short Circuit - 250°C
Applications: EmPowr® Link+ cables are intended for use in dry or wet locations for distribution of three-phase medium-voltage power. These cables may be installed in ducts or direct buried.
Options:
• Copper conductors
• STRANDFILL® blocked conductor. Tested in accordance with ICEA T-31-610
• True Triple Extrusion
• UltraPowr® smoother and cleaner semi-conducting conductor shield
• Low-strip insulation shield
• 3 X 1/C triplex or parallel
• Type MV-90 UL 1072
• TRXLPE Class III insulation for 105°/140°C temperature rating
• Type MV-105 UL 1072
• UL Listed
| copper wire shielded power cable | ||||||||||||
| compressed conductor |
copper neutral |
diameter (1) inches |
nominal jacket thkn. inches (1) |
approx. weight (1) lb/1000 ft |
ampacity (2) | |||||||
| al awg or kcmil |
no. of wires |
no. of wires |
wire size awg |
insulation | pvc jacket |
al cond. |
cu wires |
total | direct buried |
in duct |
||
| min. | max. | |||||||||||
| 115 mils NOMINAL TRXLPE INSULATION – 5 kV 133% OR 8 kV 100% | ||||||||||||
| 2 | 7 | 9 | 24 | 0.525 | 0.605 | 0.787 | 0.065 | 62 | 12 | 267 | 165 | 125 |
| 1 | 19 | 6 | 22 | 0.565 | 0.645 | 0.837 | 0.065 | 78 | 13 | 296 | 190 | 145 |
| 1/0 | 19 | 7 | 22 | 0.605 | 0.685 | 0.907 | 0.065 | 99 | 15 | 358 | 215 | 165 |
| 2/0 | 19 | 7 | 22 | 0.650 | 0.725 | 0.951 | 0.080 | 125 | 15 | 401 | 245 | 185 |
| 3/0 | 19 | 7 | 22 | 0.700 | 0.775 | 1.001 | 0.080 | 158 | 15 | 454 | 280 | 215 |
| 4/0 | 19 | 8 | 22 | 0.755 | 0.835 | 1.057 | 0.080 | 199 | 17 | 519 | 320 | 245 |
| 250 | 37 | 8 | 22 | 0.810 | 0.890 | 1.113 | 0.080 | 234 | 17 | 607 | 355 | 275 |
| 350 | 37 | 9 | 22 | 0.905 | 0.980 | 1.216 | 0.080 | 329 | 19 | 717 | 430 | 335 |
| 500 | 37 | 6 | 20 | 1.040 | 1.120 | 1.357 | 0.080 | 468 | 20 | 911 | 525 | 410 |
| 750 | 61 | 7 | 20 | 1.230 | 1.310 | 1.544 | 0.080 | 703 | 23 | 1228 | 660 | 510 |
| 1000 | 61 | 8 | 20 | 1.375 | 1.460 | 1.693 | 0.080 | 937 | 27 | 1527 | 765 | 615 |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.