Conductors: Solid or Class B Compressed concentric strand Aluminum alloy 1350 or soft drawn annealed copper per ASTM.
Conductor Shield: Extruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation.
Insulation: Natural high dielectric strength EPROTENAX™ EPR-based insulation, combined with other materials and agents that enhance the electrical and mechanical characteristics assuring extended cable life.
Insulation Shield: Extruded thermosetting semiconducting shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping.
Metallic Shield: Solid bare copper wires, helically applied and uniformly spaced.
Jacket: Black, insulating, sunlight resistant, linear low density polyethylene encapsulating the neutral wires with three extruded red stripes and NESC lightning bolt symbol.
Description: Single conductor cable with aluminum or copper conductors, triple extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength EPROTENAX™ EPR insulation, thermosetting semiconducting insulation shield, copper concentric neutral wires, black encapsulating linear low-density polyethylene (LLDPE) jacket.
Options:
• Black LLDPE jacket with no stripes
• Black PVC jacket sleeved over separator tape
• No Jacket
• Multiplex cables
• Tinned round and flat strap neutrals
• Strandseal®
• Compact stranded conductors
• UL MV-90 Rating if required
• 46kV
• RUS - Bulletin 1728F-U1
Installation:
• Conduit in Air
• Underground Duct
• Wet Locations
• With Messenger
• Direct Buried
• Isolated in Air
• Dry Locations
• Utility Primary
Specifications and ratings:
• AEIC- AEIC CS8
• ICEA- ICEA S-94-649
• For 105°C continuous, 140°C emergency, 250°C short-circuit operation.
| technical specification: | |
| conductor | 350 MCM CU |
| insulation thickness (mils) | 220 |
| concentric neutral | 18-#12 |
| conductor diameter (in) - (a) | 0.664 |
| insulation diameter (in) - (b) | 1.16 |
| insulation shield diameter (in) - (c) | 1.25 |
| jacket diameter (in) - (d) | 1.52 |
| cable weight (lbs/kft) | 2105 |
| minimum bending radius (in) | 13 |
| † ampacity (amps) - 105°c in duct | 437 |
| +/- sequence impedance resistance (µΩ/ft) - 105°c in duct | 44 |
| +/- sequence impedance reactance (µΩ/ft) - 105°c in duct | 38 |
| zero sequence impedance resistance (µΩ/ft)†† - 105°c in duct | 160 |
|
zero sequence impedance reactance (µΩ/ft)†† - 105°c in duct
|
20 |
| † ampacity (amps) - 90°c direct buried | 498 |
| +/- sequence impedance resistance (µΩ/ft) - 105°c direct buried | 67 |
| +/- sequence impedance reactance (µΩ/ft) - 105°c direct buried | 68 |
| zero sequence impedance resistance (µΩ/ft)†† - 105°c direct buried | 159 |
| zero sequence impedance reactance (µΩ/ft)††- 105°c direct buried | 20 |
| prysmian cable part number | QND000A |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.