Product Details
| Technical Specifications: | |
| Product Code | 5412SD |
| Size AWG | 14 |
| No. of Conductors | 12 |
| Strands | 7 |
| XLPE Insulation Thickness (Mils) | 30 |
| Approximate O.D. (Inches) | .133 |
| OA Jkt. Thick. (MILS) | 60 |
| Appr. O.D. (IN) | .652 |
| Appr. Weight Lbs./ M Ft | 284 |
Specifications:
- TYPE TC-ER - CONTROL & POWER TRAY CABLE
- Shielded XLPE Insulation with Overall PVC Jacket
- 18 - 10 AWG • 600 Volts • 90°C Wet/Dry
Description:
ADC’s Type TC-ER multi-conductor cables have a XLPE insulation with an aluminum tape shield and tinned copper drain wire and an overall gas and oil resistant PVC jacket.
Application:
Suitable for use in Class 1 or 2, Division 2 hazardous locations and for installation in trays, wireways, troughs, channels, ducts and conduit. Expressly approved for direct burial, wet or dry locations and outdoors in cable trays where sunlight resistant rating is required. Intended for control, power, lighting, telemetering, signals and relay or trafc control.
Conductors:
Soft Drawn Annealed Bare Copper per ASTM B-3 and B-8. Concentric 7 strand. Tinned Copper available upon request.
Insulation: XLPE:
Thickness: Per UL 66 table 4.8 for RFH-2, UL 44 table 12 for XHHW-2.
Cabling:
Conductors are assembled with fllers in the core as needed.
Shield:
Aluminum Mylar with a tinned copper drain
Overall Jacket:
A black, fame resistant, Polyvinyl Chloride (PVC) jacket is extruded over the assembly. The surface profle shall approximate that of the interior assembly. A rip cord shall be inserted under the jacket for ease of stripping.
Color Code:
ICEA Method 1 Tables E-1, E-2 & Method 4.
Industry Listings and Standards:
- UL Listed as TC-ER per UL Standard 1277*
- Rated -40°C to 90°C
- OSHA Acceptable
- NEC Articles 392
- CSA FT4
- IEEE 1202 70,000 BTU Flame Test
- ASTM - All Applicable Standards
- *UL 1277 requires a ground or three conductors to be rated ER
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.