Description :
Complying with the IEEE 802.3bt Power over Ethernet Plus Plus technology, the latest version of PLANET IGS-5225-4UP1T2S L2+ Industrial Managed PoE++ Switch features four 10/100/1000BASE-T 802.3bt PoE++ ports with each port powering up to 95 watts, one extra 10/100/1000BASE-T copper port and two 100/1000BASE-X SFP interfaces in a rugged IP30 metal case for stable operation in heavy industrial demanding environments. It supports rich PoE operation modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.
Specifications :
| Hardware Version | 4 |
| Copper Ports | 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP/mini-GBIC Slots | 2 1000BASE-SX/LX/BX SFP interfaces (Port-6 to Port-7) Compatible with 100BASE-FX SFP |
| PoE Injector Port | 4 ports with 802.3bt PoE++/802.3at PoE injector function with Port-1 to Port-4 |
| Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 14Gbps/non-blocking |
| Throughput | 10.42Mpps@ 64 bytes packet |
| Address Table | 8K entries, automatic source address learning and aging |
| Shared Data Buffer | 4Mbits |
| Flow Control |
• IEEE 802.3x pause frame for full-duplex • Back pressure for half-duplex |
| Jumbo Frame | 9Kbytes |
| Reset Button |
< 5 sec: System reboot > 5 sec: Factory default |
| ESD Protection | 6KV DC |
| Enclosure | IP30 aluminum case |
| Installation | DIN-rail or wall mounting |
| Connector |
• Removable 6-pin terminal block for power input • Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 • Removable 6-pin terminal block for DI/DO interface • Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND |
| 2 Digital Input (DI) |
• Level 0: -24V~2.1V (±0.1V) • Level 1: 2.1V~24V (±0.1V) • Input load to 24V DC, 10mA max. |
| 2 Digital Output (DO) | Open collector to 24V DC, 100mA max. |
| Dimensions (W x D x H) | 76.8 x 107.3 x 152 mm |
| Weight | 1050g |
| Power Requirements | Dual 48~56V DC (>52V DC for PoE+ output recommended) |
| Power Consumption |
• Max. 6.6 watts/22.52BTU (Power on without any connection) • Max. 282 watts/962.22BTU (Full loading with 802.3bt PoE++ function) |
| PoE Standard | IEEE 802.3bt PoE++ Type-4 PSE |
| PoE Power Budget | 240W maximum (depending on power input) |
| Basic Management Interfaces | Console; Telnet; Web browser; SNMP v1, v2c |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
Key Features :
• Gigabit 802.3bt PoE++ and PoE+ Network Deployment
• Industrial Area Department/Workgroup PoE Switch
• Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE
• Backward compatible with IEEE 802.3at/af PD device
• Up to 4 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered
• Supports PoE power up to 95 watts for each PoE port
• Total of 240-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE management features
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE admin-mode control
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection
• Intelligent PoE features
- Temperature threshold control
- PoE usage threshold control
- PD alive check
- PoE schedule
Industrial Case and Installation
• IP30 aluminum case
• DIN-rail or wall-mount design
• 48~56V DC, redundant power with reverse polarity protection
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input and Digital Output
• 2 Digital Input (DI)
•2 Digital Output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.