Technical data:
• Special drag chain cables for high mechanical stress in acc. to DIN VDE 0285-525-2-51/DIN EN 50525-2-51 and UL-Std.758 AWM Style 20841 and 21184

Temperature range
• flexing -30°C to +80°C
• fixed installation -40°C to +80°C

Nominal voltage
• VDE U₀/U 300/500 V
• UL 600 V

Test voltage
• 3000 V

Insulation resistance
• min. 100 MOhm x km

Minimum bending radius
• flexing 5x cable Ø
• fixed installation 3x cable Ø

Radiation resistance
• up to 100x106 cJ/kg (up to 100 Mrad)

Cable structure:
• Tinned copper, fine wire conductors Unilay with short pitch length
• Core insulation of special PP
• Core identification to DIN VDE 0293 black cores with continuous white numbering
• GN-YE conductor, 3 cores and above
• Stranding:
<7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction
≥7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler
• Outer sheath of special-TPE-O, extruded as filler with pressure
• Sheath colour ocean blue (RAL 5020)
• with meter marking
• TPE: The selected tinned copper wire conductor permits the installation in aggressive environments as well as hydrogen sulfide, ammonia and sulfur dioxide

Properties:
• Microbe-resistance - TPE
• High property of alternating bending strength
• Long life durabilitys due to low friction-resistance
• High tensile strength, abrasion and impact resistance at low temperature
• Extremely high bending loads
• Low adhesion
• Halogen-free
• Higher notch toughness
• Oil resistance
• Better chemical resistance
• UV and ozone resistance
• Higher economical solution
• Reduced Ø, therefore less moving masses
• The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers

Note:
• G = with green-yellow conductor
• x = without green-yellow conductor (OZ)
• AWG sizes are approximate equivalent values. The actual cross-section is in mm².
• Cleanroom qualification tested with analog type.
• Please note "cleanroom qualified" when ordering.
• screened analogue type: MULTISPEED® 500-C-TPE UL/CSA

Application:
The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high an slow speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e. g. in energy drag chains, industry robotics, production lines, automatic control systems and permanent movable machinery parts for multi-shift operation. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text.