Product Details
| Technical Specifications: | |
| Product Code | HW151 1403G |
| Size AWG | 14 |
| No. Of Conductors | 3 |
| No. Of Strands | 7 |
| Ground Wire Size AWG | 14 |
| Nylon Jacket Thickness Mils | 4 |
| Insulation Thickness Mils | 15 |
| Jacket Thickness Mils | 45 |
| Overall Diameter Inch | 0.364 |
| Net Weight Lbs/Mft | 89 |
Specifications:
- HW151
- Tray Cable - Control Cable
- 600 Volt UL Type TC-ER*
- THHN or THWN Insulation
- PVC Jacket
Notes:
* Flat Construction
Application:
General purpose cable for use in power, control and lighting circuits in a broad range of commerical and industrial applications. Approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations. UL approved for use in continuous operation at 75°C in wet locations, 90°C in dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
Conductors:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8.
Insulation: XLPE:
Flame-retardent PVC per UL Standard 83 stranding per ASTM B-8.
Insulation Jacket:
Clear nylon per UL Standard 83 for Type THHN or THWN wire.
Jacket:
Sunlight-resistant PVC per UL Standard 1277.
Flame Tests:
IEEE 383 70,000 BTU/hr flame test
Color Code:
ICEA Method 1, Table E-2
Additional Standards:
- UL Type TC per Article 336 of the NEC
- Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.