Specifications

• HW104
• INSTRUMENTATION CABLE
• 300 Volt UL Type PLTC & ITC, 105°C
• Multiple Triads
• Individual and Overall Shield
• PVC Insulation
• PVC Jacket
• Copper Conductors

Application:
For use in instrumentation and process control applications where protection from electrostatic interference is required. UL listed as Type PLTC and ITC and approved for installation indoors or outdoors, aerially, in conduits, ducts and cable trays in circuits not exceeding 300 volts. May be used in NEC Class 1, Division 2 hazardous locations.

Conductors:
7-strand soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8.

Insulation:
Flame-retardant PVC.

Individual Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.

Overall Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.

Jacket:
Sunlight-resistant PVC. A ripcord is applied longitudinally under the jacket to facilitate stripping.

Flame Tests:

• UL 1581 70,000 BTU/hr flame test
• CSA FT4 rated

Color Code:

• ICEA Method 1: black, white and red triads with printed number
• Available upon request: black, red and blue triads with printed number

Additional Standards:

• UL Standard 13
• UL Standard 2250
• NEC Type ITC per Articles 501, 502, 503, and 504
• Approved for Class 2 and Class 3 circuits per Article 725 of the NEC