Conductor: The conductor is class “B” stranded compressed concentric round in accordance with ASTM B8. The wires are uncoated soft, annealed copper of 100% conductivity in accordance with ASTM B3. The conductor resistance meets the requirements of ICEA S-95-658 (NEMA WC70).

Insulation: Low smoke non-halogen ethylene propylene rubber (EPR) rated for 90°C wet or dry, complying with ICEA standards (see chart on back). The insulation fits tightly to the conductor but is ‘clean-stripping.’ An opaque polyester tape or other suitable separator is used over the conductor.

Jacket: Flame retardant, low smoke non-halogen and oil resistant crosslinked polyolefin (XLPO) jacket (see chart on back). The jacket is bonded to the EPR insulation.

Applications: These are single conductor 2000 volt power cables where low-smoke non-halogen cables are required. They consist of a ethylene propylene rubber insulated conductor jacketed with a tough low smoke zero halogen (LSZH) crosslinked polyolefin (XLPO) jacket. They are highly heat, oil and moisture-resistant, extremely tough yet flexible, and can sustain 90°C wet or dry operating temperatures. A shielded version is available as well.

Ratings:
• Rated 90°C Wet or Dry Traction Power Cable
• UL 1581 Vertical Tray (70,000 BTU)
• UL RHW-2