Conductor: Solid or Class B compact or compressed concentric strand aluminum alloy 1350 or soft drawn annealed copper per ASTM.
Conductor Shield: Extruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation.
Insulation: Natural high dielectric strength VOLTENE™ TRXLPE insulation, exhibiting an optimum balance of mechanical and electrical properties, insuring resistance to treeing.
Insulation Shield: Extruded thermosetting semiconducting shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping.
Metallic Shield: Solid bare copper wires, helically applied and uniformly spaced.
Jacket: Black insulating sunlight resistant linear low density polyethylene encapsulating the neutral wires with three extruded red stripes.
Description: Single conductor cable with aluminum or copper conductors, triple extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength VOLTALENE™ TRXLPE insulation, thermosetting semiconducting insulation shield, copper concentric neutral wires, black encapsulating linear low-density polyethylene (LLDPE) jacket.
Options:
• Black LLDPE jacket with no stripes
• Black PVC jacket sleeved over separator tape
• No Jacket
• EPROTENAX™ (EPR) insulation
• Multiplex cables
• Tinned round and flat strap neutrals
• Strandseal®
• Super smooth conductor shield
• Cables made to AEIC CS8 and/or ICEA S-94-649
• 46kV
Installations:
• Conduit in Air
• Direct Buried
• Underground Duct
• Isolated in Air
• Wet Locations
• Dry Locations
• With Messenger
• Utility Primary
Specifications and Ratings:
• CSA - CSA C68.5 -40°C
• For 90°C continuous, 130°C emergency, 250°C short-circuit operation.
| technical specifications: | |
| conductor | 2 Solid al |
| insulation thickness (mils) | 90 |
| concentric neutral | 6-#16 |
| conductor diameter (in) - (a) | 6.55 |
| insulation diameter (in) - (b) | 12.40 |
| insulation shield diameter (in) - (c) | 14.27 |
| jacket diameter (in) - (d) | 19.70 |
| cable weight (lbs/kft) | 407 |
| minimum bending radius (in) | 178 |
| † ampacity (amps) - 90°c in duct | 123 |
| +/- sequence impedance resistance (µΩ/ft) - 90°c in duct | 1.08 |
| +/- sequence impedance reactance (µΩ/ft) - 90°c in duct | 0.15 |
| zero sequence impedance resistance (µΩ/ft)†† - 90°c in duct | 4.03 |
|
zero sequence impedance reactance (µΩ/ft)†† - 90°c in duct
|
0.08 |
| † ampacity (amps) - 90°c direct buried | 180 |
| +/- sequence impedance resistance (µΩ/ft) - 90°c direct buried | 1.10 |
| +/- sequence impedance reactance (µΩ/ft) - 90°c direct buried | 0.34 |
| zero sequence impedance resistance (µΩ/ft)†† - 90°c direct buried | 3.55 |
| zero sequence impedance reactance (µΩ/ft)††- 90°c direct buried | 0.08 |
| prysmian cable part number | Q4LØØZC |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.