Conductor: Class B compact strand soft drawn annealed copper or aluminum Series 8000 per ASTM.

Insulation: High dielectric strength crosslinked polyethylene insulation to ICEA S-95-658/NEMA WC70 and UL Standard 44 for type XHHW-2.

Grounding Conductors: Bare stranded copper conductor per UL, ICEA, and ASTM.

Assembly: Phase identified conductors with extruded fillers and grounding conductors, forming a firm and cylindrical cable core.

Mechanical Protection: High strength and high crush resistant 2500psi Air Bag™ layer extruded over the core assembly.

Chemical Protection: Drylam™ layer consisting of a laminated aluminum tape and an extruded polymeric layer which provides a moisture barrier and chemical resistance.

Jacket: Sunlight and moisture resistant polyvinyl chloride (PVC) jacket.

Description: Two conductor cable with stranded copper or aluminum conductors, extruded insulation system consisting of high dielectric strength crosslinked polyethylene, extruded fillers, grounding conductor(s), foamed polymeric layer for superior mechanical protection, longitudinally applied aluminum tape and extruded polymeric layer for resistance against oils and hydrocarbons, overall moisture and sun resistant black PVC jacket. Suitable for Class I Division 2 locations.

Options:
• Colored jackets
• Low Smoke Halogen Free Jacket
• Compressed Conductors
• 2 kV Rating
• UL 1277 Type TC
• ER 'Exposed Run' Rated

Installation:
• In Cable Tray
• Conduit in Air
• Direct Buried
• Underground Duct
• Isolated in Air
• Wet Locations
• Dry Locations
• Industrial
• With Messenger

Specifications and Ratings:
• UL- UL 44 Sunlight Resistant ER “Exposed Run” Rated Single Conductor Rated XHHW-2 CSA FT4 Flame Test CSA Cold Bend (-40°) IEEE 383 Flame Test
• NEMA - WC70 Direct Buried
• ICEA- S-95-658
• For 90°C continuous use in wet or dry conditions.