Conductors: Solid or Class B Compressed concentric strand aluminum alloy 1350 or soft drawn annealed copper per ASTM. Stranded conductors are water-blocked with STRANDSEAL® conductor filling compound.
Conductor Shield: Extruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation.
Insulation: Natural high dielectric strength EPROTENAX™ EPR-based insulation, combined with other materials and agents that enhance the electrical and mechanical characteristics assuring extended cable life.
Insulation Shield: Extruded thermosetting semiconducting shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping.
Metallic Shield: Solid bare copper wires, helically applied and uniformly spaced. Water-blocking agents applied over the insulation shield and around the neutral wires to prevent longitudinal water penetration.
Jacket: Black insulating sunlight resistant linear low density polyethylene encapsulating the neutral wires with three extruded red stripes and NESC lightning bolt symbol.
Description: Single conductor cable with solid or filled strand aluminum or copper conductors, triple extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength EPROTENAX™ EPR insulation, thermosetting semiconducting insulation shield, copper concentric neutral wires, water swellable agents, black encapsulating linear low-density polyethylene (LLDPE) jacket.
Options:
• Black LLDPE jacket with no stripes
• Multiplex cables
• Tinned round and flat strap neutrals
• Compact stranded conductors
• UL MV-90 rating if required
• 46kV
• RUS Bulletin 1728F-U1 where applicable
Installation:
• Conduit In Air
• Direct Buried
• Underground Duct
• Isolated In Air
• Wet Locations
• Dry Locations
• With Messenger
• Utility Primary
Specifications and ratings:
• AEIC- AEIC CS8
• ICEA- ICEA S-94-649
• ICEA- ICEA T-31-610
• ICEA- ICEA T-34-664
• For 105°C continuous, 140°C emergency, 250°C short-circuit operation
| technical specifications: | |
| conductor | 4/0 awg al |
| insulation thickness (mils) | 175 |
| concentric neutral | 11-#14 |
| conductor diameter (in) - (a) | 0.515 |
| insulation diameter (in) - (b) | 0.92 |
| insulation shield diameter (in) - (c) | 0.99 |
| jacket diameter (in) - (d) | 1.22 |
| cable weight (lbs/kft) | 789 |
| minimum bending radius (in) | 10 |
| † ampacity (amps) - ‡105°c in duct | 263 |
| +/- sequence impedance resistance (µΩ/ft) - ‡105°c in duct | 111 |
| +/- sequence impedance reactance (µΩ/ft) - ‡105°c in duct | 41 |
| zero sequence impedance resistance (µΩ/ft)†† - ‡105°c in duct | 422 |
| zero sequence impedance reactance (µΩ/ft)†† - ‡105°c in duct | 22 |
| † ampacity (amps) - ‡105°c direct buried | 346 |
| +/- sequence impedance resistance (µΩ/ft) - ‡105°c direct buried | 124 |
| +/- sequence impedance reactance (µΩ/ft) - ‡105°c direct buried | 86 |
| zero sequence impedance resistance (µΩ/ft)†† - ‡105°c direct buried | 416 |
| zero sequence impedance reactance (µΩ/ft)††- ‡105°c direct buried | 22 |
| prysmian cable part number | QMT020A |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.