Product Details

Conductor:
• Bare annealed copper per ASTM B3 
• Sizes 10 AWG and smaller are Class B compressed stranding per ASTM B8 
• Sizes 8 AWG and larger are compact stranding per ASTM B496

Insulation:
• Cross-Linked Polyethylene (XLPE) insulation per ICEA S-95-658 and UL 44, Listed XHHW-2 
• Power conductors sizes 6 AWG and smaller are color-coded per ICEA Method 1, Table E2 
• Power conductors sizes 4 AWG and larger are black with printed numbers per ICEA Method 4 
• Control conductors are color-coded black, red, blue and yellow

Cable Assembly:
• Insulated conductors are cabled together with non-hygroscopic fillers when required 
• A binder tape, when required, is applied over the cabled core

CCW Armor:
• Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 
• CCW armor conductivity meets the grounding requirements of NEC Article 250

Jacket:
• Flame-retardant, moisture- and sunlight-resistant Polyvinyl Chloride (PVC), black 
• Low temperature performance meets ASTM D746 brittleness temperature at or below -40°C

Applications:
• CCW armored Composite Power and Control cables offer an economical, rugged and reliable alternative to  labor-intensive cable in conduit wiring methods 
• For use in Class I and II, Division 2; Class III, Divisions 1 and 2; and Class I, Zone 2 hazardous locations  per NEC Articles 501, 502, 503 and 505 
• For use as services, feeders and branch circuits for power, lighting, control, and signal circuits in accordance  with NEC Articles 330 and 725
• Installed indoors or outdoors, wet or dry locations, directly buried, embedded in concrete, in a raceway, as  aerial cable on a messenger, in cable trays, or as exposed runs secured to supports in accordance with NEC  Article 330 
• Recognized for use on fixed or floating offshore petroleum facilities as recommended by the American  Petroleum Institute

Features:
• CCW armor provides an impervious barrier to moisture, gas and liquids 
• CCW armor provides EMI shielding performance 
• Factory assembled and tested cable for use as an alternative to cable in conduit wiring systems  
• Meets cold impact at -40°C 
• 90°C continuous operating temperature, wet or dry 
• 130°C emergency rating 
• 250°C short circuit rating

Specifications:
Design Adherence: 
• ICEA S-95-658/WC 70 Standard for Non-Shielded Power Cable, 2 kV or Less 
• UL 44 Rubber Insulated Wires and Cables 
• UL 1569 Metal Clad Cables 
• UL 1309 Marine Shipboard Cable

Flame Tests:
• ICEA T-29-520 (210,000 BTU/hr) 
• IEEE 383 (70,000 BTU/hr) 
• CSA FT4 
• IEEE 1202 (70,000 BTU/hr) 
• UL 1581 (70,000 BTU/hr) 
• IEC 60332-3 Cat. A

Compliances:
• UL Type MC, XHHW-2, SUN RES, CT USE, DIR BUR, -40°C, UL File # E69797 
• UL Listed Marine Shipboard, UL File # E85994 
• American Bureau of Shipping (ABS) Listed for CWCMC 
• RoHS Compliant