Technical data: 
• Flexible halogen-free control cable adapted to DIN VDE 0285-525-3-11/DIN EN 50525-3-11 

Temperature range: 
• Flexing -5°C to +70°C 
• Fixed installation -40°C to +70°C 

Nominal voltage: 
• U0/U 300/300 V 

Test voltage: 
• 2000 V 

Breakdown voltage: 
• Min. 4000 V 

Minimum bending radius: 
• 7,5x cable Ø 

Radiation resistance: 
• Up to 20x106 cJ/kg (up to 20 Mrad) 

Cable structure: 
• Bare copper-conductor, to DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5 
• Core insulation of thermoplastic compound 
• Core identification to DIN VDE 0293-308 
• GN-YE conductor, 3 cores and above 
• Outer sheath of thermoplastic compound 
• Sheath colour by request 
• with meter marking 

Properties: 
• The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers 

Tests: 
• Tested for flame retardation acc. to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (equivalent DIN VDE 0472 part 804 test method B) 
• Smoke density acc. to DIN VDE 0482-1034-1+2, DIN EN 61034-1+2, IEC 61034-1+2 
• Halogen-free acc. to DIN VDE 0285-525-1, DIN EN 50525-1 

Note: 
• G = with green-yellow conductor x = without green-yellow conductor 
• Please complete the part number for these cables by adding the suffix for the colour required as per the list: 0 = approx.RAL 9005 black, 1 = approx.RAL 9003 withe, 2 = approx.RAL 5015 blue, 3 = approx.RAL 6018 green, 4 = approx.RAL 8003 brown, 5 = approx.RAL 1021 yellow, 6 = approx.RAL 3000 red, 7 = approx.RAL 2003 orange, 8 = approx.RAL 4005 violet, 9 = ca.RAL 7001/7032 grey, Further colours on request. 
• AWG sizes are approximate equivalent values. The actual cross-section is in mm². 

Application: 
• These cables may be used when halogen-free, low smoke and corrosive gas properties are required in case of fire. For moderate mechanical demands in the house, kitchen and office, for house equipment in damp rooms (for example: washing machines, spin-dryers and refrigerators). Suitable for cooking and heating equipment, providing the cable is not in contact with hot components or heat radiation

Not suitable for: 
• in high temperature areas (for example, in lighting equipment), outside buildings, in industrial or agricultural buildings, connection of electrical power tools. = The product is conformed with the EC Low-Voltage Directive 2006/95/EC.