Belden 1370R Cable 20 AWG HD Coaxial System Integrators Video Riser Coax Cable

Belden 1370R Cable 20 AWG HD Coaxial System Integrators Video Riser Coax Cable

Precio habitual $0.51 Oferta /per Foot

Belden 1370R Cable 20 AWG HD Coaxial System Integrators Video Riser Coax Cable

Description:
• Video Cable, Riser-CMR, RG59, 20 AWG solid bare copper, foam polyethylene insulation, Duofoil®+85% tinned copper braid, PVC jacket

Insulation:
• Material: Gas-injected FHDPE - Foam High Density Polyethylene
• Dia. (in.): 0.136

Outer Jacket:
• Material:PVC - Polyvinyl Chloride

Mechnical Characteristics (Overall):
• Operating Temperature Range: -30°C To +75°C
• UL Temperature Rating: 75°C
• Bulk Cable Weight: 22 lbs/1000 ft.
• Max. Recommended Pulling Tension: 57 lbs.
• Min. Bend Radius/Minor Axis: 2 in.

Applicable Specifications and Agency Compliance (Overall):
Applicable Standards & Environmental Programs:
• NEC/(UL) Specification: CMR
• CEC/C(UL) Specification: CMR
• EU Directive 2011/65/EU (ROHS II): Yes
• EU CE Mark: Yes
• EU Directive 2000/53/EC (ELV): Yes
• EU Directive 2002/95/EC (RoHS): Yes
• EU RoHS Compliance Date (mm/dd/yyyy): 11/21/2011
• EU Directive 2002/96/EC (WEEE): Yes
• EU Directive 2003/11/EC (BFR): Yes
• CA Prop 65 (CJ for Wire & Cable): Yes
• MII Order #39 (China RoHS): Yes
• RG Type: Sub-miniature 59/U

Electrical Characteristics (Overall):
• Nom. Characteristic Impedance (Ohm): 75
• Nom. Inductance (μH/ft): 0.107
• Nom. Capacitance Conductor to Shield (pF/ft): 16.600
• Nominal Velocity of Propagation VP (%): 84.000
• Nominal Delay (ns/ft): 1.210
• Nom. Conductor DCR @ 20°C (Ohm/1000 ft): 10.100
• Nominal outer Shield DCR @ 20°C (Ohm/1000 ft): 4.100
• Max.Operating Voltage - UL: 300 V RMS

Flame Test:
• UL Flame Test: UL1666 Vertical Shaft

Suitability:
• Suitability - Indoor: Yes
• Suitability - Outdoor: No

Plenum/Non-Plenum:
• Plenum (Y/N): No
• Plenum Number: 1370P

Benefits and Features:
• Sweep tested to 3GHz and guarantee -15dB Return Loss
• Features a foil shield that is securely bonded to the core, making stripping and termination easier and eliminating the risk of foil stringers and shorting
• New design uses high velocity dielectrics so plenum and non-plenum versions are close in size, allowing selection of a single type of compression connector for both

technical specification:
awg 20
# coax 1
stranding solid
number of conductors 1
conductor material bare copper
dia. (in.) 0.032
outer shield - type tape
outer shield - material bonded aluminum foil-polyester tape-aluminum foil
overall cable-nominal dia. (in.) 0.202
belden cable part number 1370R

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question