General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 1/0 Gauge Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
Select gauge from drop-down menu for prices:
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 2 Gauge Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 1 Gauge Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 2/0 Gauge Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 3/0 Gauge Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 4/0 Gauge Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 250MCM Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 350MCM Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
- General Cable Anaconda® Brand Type MP-GC (Uniblend EPR) Mine Power 500MCM Feeder w/Ground Check EPR CPE 15000 Volts Three Conductor
Product Details
Conductor: 2 AWG thru 500 kcmil annealed bare copper, Compact Class B strand
Extruded Strand Shield (ESS): Extruded thermosetting semi-conducting stress control layer over conductor
Insulation: Ethylene Propylene Rubber (EPR) insulation colored for contrast with black conducting layers
Extruded Insulation Shield (EIS): Extruded thermosetting semi-conducting layer, free stripping from insulation with color-coded (black, white and red) marker strip placed under the copper tape
Insulation Shield: Overlapped annealed copper tape
Ground-Check Conductor: Annealed copper Class B strand, insulated with yellow polypropylene
Grounding Conductors: Two coated annealed copper conductors, Class B strand
Jacket: Lead-cured Chlorinated Polyethylene (CPE)
Jacket Marking: GENERAL CABLE® ANACONDA® BRAND (SIZE) 3/C TYPE MP-GC 15000 VOLTS P-07-KA110019-MSHA
Options:
• Colored jackets are available
• CSA compliance available upon request
Applications:
• Provides high-voltage distribution intended for permanent installations
• Designed for use:
- In underground mining and bore holes
- In aerial installations, ducts or direct burial
Features:
• Excellent heat, moisture, oil, corona, chemical and radiation resistance
• High dielectric strength
• Electrical stability under stress
• Low dielectric loss
• Triple extrusion forms a virtually perfect electrode, eliminating unequal electrical stresses
• Tough and reliable
• Highly resistant to tearing, punctures, abrasions, oil and flame
Compliances:
• ICEA S-75-381 Portable and Power Feeder Cables for use in mines and similar applications
• Meets flame test requirements and is accepted for listing by MSHA
• Approved by the Pennsylvania Department of Environmental Protection
• Meets CAN/CSA C22.2 No. 96.1 Mine Power Feeder Cables
Packaging: Material cut to length and shipped on nonreturnable reels
technical specification: | |
cond. size (awg/ kcmil) | 1/0 |
no. of cond. | 3 |
cond. strand | 19 |
nominal insulation thickness(inches) | 0.175 |
nominal insulation thickness(mm) | 4.4 |
grd. cond. size (awg) | 4 |
grd-check cond. size (awg) | 8 |
nominal jacket thickness(inches) | 0.140 |
nominal jacket thickness(mm) | 3.6 |
nominal cable 0.d.(inches) | 2.07 |
nominal cable 0.d.(mm) | 52.6 |
copper weight(lbs/1000 ft) | 1490 |
copper weight(kg/km) | 2218 |
net weight(lbs/1000 ft) | 2901 |
net weight(kg/km) | 4317 |
ampacity | 215 |
catalog number | 16365.915100 |