Conductors: Flexible tinned copper 

Ground Check Conductor2: Flexible tinned copper with yellow polypropylene insulation 

Strand Shield: Semi-conducting layer 

Ground Wires: Flexible tinned copper 

Insulation: 90°C ethylene-propylene rubber (EPR) 

Tape: Non-conducting 

Insulation Shielding: Tinned copper and color coded nylon braid 

Assembly: Taped core 

Jacket1: Reinforced mold-cured thermosetting Chlorinated Polyethylene (CPE) Jacket. Cable identification via permanent marking. 

Application: 
• Heavy duty portable power cable for use in circuits not exceeding 5,000 volts (see next page for continuous miner circuit requirements exceeding 2000 volts). Designed for applications such as longwall shearers, continuous miners and mobile equipment such as shovels, dredges and drills. Recommended maximum continuous conductor temperature is 90°C. 
• Cable carries “P-7K-184-MSHA” marking indicating acceptance as flame resistant by the Pennsylvania Department of Environmental Protection and the Mine Safety and Health Administration. 
• Tiger® Brand Mining Cable meets or exceeds ICEA Standards S-75-381/NEMA WC-58.
• Tiger® Brand Cable meets or exceeds ASTM B-172 and B-33. Suitable for shallow water submersion. 

Ratings & Approvals: 
• Mine Safety & Health Administration 7K-184-MSHA. 
• Pennsylvania Department of Environmental Protection P-7K-184. 
• Tiger® Brand Mining Cables meet or exceed ICEA Standards S-75-381 & CSA Standards C 22.2 #96. 
• Canadian Standards Association File 82346, FT1, FT5, -50°C Type SHD-GC, SHD-BGC up to 25kV Type W, G, G-GC, G-BGC up to 2kV 
• Canadian Standards Association Type SHD-GC FT4