Product Details
Overview: Prysmian’s versatile outdoor rated drop for duct applications that contains a 2 fiber indoor riser rated MDU cable and a 22 AWG tone wire.
Features and Benefits:
Versatile Design:
• Outdoor rated cable contains 22 AWG wire for toning
• Internal white 4.9mm round sub-unit (Riser/FT4 flame rated) allows routing directly into customer premise
• MDU unit contains two EZstrip™ tight buffered units for easy connectorization or splicing
• MDU sub-unit is compatible with stapling (T25 Round Crown Staples)
Easy Access Design:
• Jacket ridge shows location of strength element for safe cable entry
• Subunit is easily separated from the cable
• EZstrip tight buffered fibers allow for fast fiber stripping
• Ripcords for easy removal of long sub-unit lengths
Reliability:
• Rugged 4.9mm sub-unit
• ITU G657.B3 Bend-Insensitive fiber provides extreme bending performance (down to 5mm radius)
• 200 kpsi fibers are proof tested at twice the load of standard fibers for enhanced lifetime reliability
• Tone wire allows easy location to avoid damage when installing other cables
Registered Supplier: ISO 9001, ISO 14001, TL 9000, and OHSAS 18001
| performance specifications (Below Test per GR20 & ICEA 717 Requirements) |
||
| bend radius dynamic static |
20 x cable od 10 x cable od |
|
| tensile rating installation residual |
n 450 135 |
lbf 100 30 |
| crush resistance short/long term |
n/cm 440/130 |
lbf/in 250/75 |
| temperature ratings operation installation storage/shipping |
°c -40 to +70 -20 to +60 -40 to +75 |
°f -40 to +158 -4 to +140 -40 to +167 |
| cable twist | 2m twist, 10 cycles per ICEA 717 | |
| cyclic flex | 25 cycles per ICEA 717 | |
| low high bend | -30C & +60C per ICEA 717 | |
| staple test (20 t25) | < 0.10 dB at 1550nm | |
| water penetration | 3m length | |
Dimensions and Weights
| buffer tube od | cable od | cable weight |
| 4.9 mm (0.19 in) | 7.6 mm (0.3 in) | 49 kg/km (33 lbs/kft) |
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.