Product Details

Conductors: Solid or Class B Compressed concentric strand Aluminum alloy 1350 or soft drawn annealed copper per ASTM. 

Conductor Shield: Extruded thermosetting semiconducting shield which is free stripping from the conductor and bonded to the insulation. 

Insulation: Natural high dielectric strength EPROTENAX™ EPR-based insulation, combined with other materials and agents that enhance the electrical and mechanical characteristics assuring extended cable life. 

Insulation Shield: Extruded thermosetting semiconducting shield with controlled adhesion to the insulation providing the required balance between electrical integrity and ease of stripping. 

Metallic Shield: Solid bare copper wires, helically applied and uniformly spaced. 

Jacket: Black, insulating, sunlight resistant, linear low density polyethylene encapsulating the neutral wires with three extruded red stripes and NESC lightning bolt symbol. 

Description: Single conductor cable with aluminum or copper conductors, triple extruded insulation system consisting of a thermosetting semiconducting conductor shield, high dielectric strength EPROTENAX™ EPR insulation, thermosetting semiconducting insulation shield, copper concentric neutral wires, black encapsulating linear low-density polyethylene (LLDPE) jacket. 

Options: 
• Black LLDPE jacket with no stripes 
• Black PVC jacket sleeved over separator tape 
• No Jacket 
• Multiplex cables 
• Tinned round and flat strap neutrals 
• Strandseal® 
• Compact stranded conductors 
• UL MV-90 Rating if required 
• 46kV 
• RUS - Bulletin 1728F-U1 

Installation: 
• Conduit in Air 
• Underground Duct 
• Wet Locations 
• With Messenger 
• Direct Buried 
• Isolated in Air 
• Dry Locations 
• Utility Primary 

Specifications and ratings:
• AEIC- AEIC CS8 
• ICEA- ICEA S-94-649 
• For 105°C continuous, 140°C emergency, 250°C short-circuit operation.