Product Details
| Technical Specifications: | |
| Product Code | HW153 01437 |
| Size AWG | 14 |
| No. of Conductors | 37 |
| No. of Strands | 7 |
| Nylon Jacket Thickness Mils | 4 |
| Insulation Thickness Mils | 15 |
| Jacket Thickness Mils | 60 |
| Overall Diameter Inch | 1.02 |
| Net Weight Lbs/Mft | 768 |
Specifications:
- HW153
- Tray Cable - Shielded Control Cable
- 600 Volt UL Type TC-ER*
- TFN Insulation
- PVC Jacket Copper Conductor
Application:
General purpose cable for use where shielding from ambient electrical interference is required in power, control and lighting circuits in a broad range of commercial and industrial applications. Approved for continuous operation at 90°C in dry locations, installation indoors or outdoors, aerially, in conduits, ducts, cable trays or direct burial in circuits not exceeding 600 volts. May be used in NEC Class I and II, Division 2 hazardous locations.
Conductors:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8.
Insulation: XLPE:
Flame-retardant PVC per UL Standard 62 for Type TFN wire.
Insulation Jacket:
Clear nylon per UL Standard 62 for Type TFN wire.
Overall Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7-strand tinned copper drain wire.
Jacket:
Sunlight-resistant PVC per UL Standard 1277.
Flame Tests:
IEEE 383 70,000 BTU/hr flame test
Color Code:
ICEA Method 1, Table E-2
Additional Standards:
- UL Type TC per Article 336 of the NEC.
- Approved for Class 1 remote-control and signaling circuits per Article 725 of the NEC.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.