Amercable Tiger Brand 2/0 AWG Type SHD-CGC 3/C Mold-cured Jacket 2000 Volts Mining Cable 36-505-020

Conductors: Flexible tinned copper 

Ground Check Conductor2: Flexible tinned copper with yellow insulation located in the center of the cable 

Insulation Shielding: Tinned copper and colorcoded nylon braid 

Insulation: 90°C ethylene-propylene rubber (EPR) 

Strand Shield: Semi-conducting layer 

Tape: Non-conducting 

Separator Tape: Non-conducting 

Ground Wires: Flexible tinned copper 

Jacket1: Reinforced mold-cured thermosetting Chlorinated Polyethylene (CPE) Jacket. Cable identification via permanent marking. 

Application: 
• Heavy duty portable power cable for use in circuits not exceeding 2,000 volts. Designed for applications such as longwall shearers, continuous miners, loaders, drills, conveyors, pumps, and other mobile equipment requiring grounding conductors, where a ground check conductor, and metallic shielding are required. Recommended maximum continuous conductor temperature is 90°C. 
• Cable carries “P-7K-184-MSHA” marking indicating acceptance as flame resistant by the Pennsylvania Department of Environmental Protection and the Mine Safety and Health Administration. 
• Tiger® Brand Mining Cable meets or exceeds ICEA Standards S-75-381/NEMA WC-58, ASTM B-172 and B-33. 

Ratings & Approvals: 
• Mine Safety & Health Administration 7K-184-MSHA. 
• Pennsylvania Department of Environmental Protection P-184. 
• Tiger® Brand Mining Cables meet or exceed ICEA Standards S-75-381 & CSA Standards C 22.2 #96. 
• Canadian Standards Association File 82346, FT1, FT5, -50°C Type SHD-GC, SHD-BGC up to 25kV Type W, G, G-GC, G-BGC up to 2kV