HW120 Instrumentation Cable 600 Volt Type TC-LS, 90°C Single and Multiple Pairs Individual and Overall Shield XLP Insulation Low Smoke Zero Halogen Jacket Tinned Copper Conductors FM Approved - 16 AWG - 24 Pair

HW120 Instrumentation Cable 600 Volt Type TC-LS, 90°C Single and Multiple Pairs Individual and Overall Shield XLP Insulation Low Smoke Zero Halogen Jacket Tinned Copper Conductors FM Approved - 16 AWG - 24 Pair

Select gauge from drop-down menu for prices:

HW120 Instrumentation Cable 600 Volt Type TC-LS, 90°C Single and Multiple Pairs Individual and Overall Shield XLP Insulation Low Smoke Zero Halogen Jacket Tinned Copper Conductors FM Approved - 16 AWG - 24 Pair
Technical Specifications:
Catalog Number HW120 01624
Size AWG 16
No. of Pairs
24
Insulation Thickness Mils 30
Jacket Thickness Mils 80
Overall Diameter Inch
1.40
Net Weight Lbs/Mft 960

Specifications:

  • HW120
  • Instrumentation Cable
  • 600 Volt Type TC-LS, 90°C
  • Single and Multiple Pairs
  • Individual and Overall Shield
  • XLP Insulation
  • Low Smoke Zero Halogen Jacket
  • Tinned Copper Conductors
  • FM Approved

Application:
LifeGuard™ Low Smoke Zero Halogen* cable is for use in instrumentation and process control applications where protection from electrostatic interference is required. It is highly flame-retardant, produces very small amounts of smoke when burned and contains no halogens. LifeGuard™ cable is ideal for applications where a high degree of safety and equipment protection is required.

LifeGuard™ cable is NEC listed as Type TC-LS and approved for installation indoors or outdoors, aerially, in conduits, ducts, cable trays and direct burial in circuits not exceeding 600 volts. It may be installed in temperatures as low as -30°C and used in NEC Class 1, Division 2 hazardous locations. It is NEC approved for continuous operation at 90°C in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

Product Features:

  • FM approved per cable fire propagation Standard 3972, Group 1
  • Tray rated
  • Sunlight-resistant
  • Approved for direct burial
  • Tinned conductors provide ease of termination and added protection in caustic environments
  • Superior electrostatic interference protection from individual and overall shield
  • Very low smoke production when burned
  • LifeGuard™ jacket produces zero halogens during fire - less toxic and corrosive
  • LifeGuard™ jacket is environmentally safe - lead, sulfur and halogen free
  • Highly chemical resistant
  • Very flame retardant
  • Burns to an ash - does not exhibit thermoplastic drip
  • Excellent compression and impact resistance
  • Superior tensile strength and abrasion resistance
  • Flexible jacket with low coefficient of friction

Conductors:
7 strand tin coated, soft annealed copper per ASTM B-33, Class B stranding per ASTM B-8

Insulation:
Cross-linked polyethylene (XLP) per UL Standard 44

Individual Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7 strand tinned copper drain wire

Overall Shield:
Aluminum-polymer tape providing 100% coverage with a flexible 7 strand tinned copper drain wire

Jacket:

  • Sunlight-resistant and flame-retardant, Low Smoke Zero Halogen polyolefin per UL Standard 1277
  • A ripcord is applied longitudinally under the jacket to facilitate stripping

Flame Tests:

  • FM Approved - Class 3972 Specification Test Standard - Cable Fire Propagation Group 1
  • UL Standard 1581 70,000 BTU/hr flame test
  • ICEA T-29-520 210,000 BTU/hr flame test
  • Flame Test Listings May Vary By Cable Size

Color Code:
ICEA Method 9: black and white twisted pairs with numbers

Additional Standards:

  • NEC Type TC per articles 336, 392, and 501.4 (b) and Class 1 circuits per NEC article 725
  • UL Standard 1685 70,000 BTU/hr Flame Propagation and Smoke Release Test

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question