| Technical Specifications: | |
| Size (AWG or kcmil): | 1/0 |
| No. of Strands | 19 |
| Insulation Thickness (Mils): | 90 |
| Jacket Thickness (Mils): | 80 |
| Insulation Diameter (Inch): | 0.59 |
| Overall Diameter (Inch): | 0.89 |
| Net Weight | 565 |
Specifications:
- HW 202
- Power Cable
- 5KV UL Type MV-90, 90°C
- Single Conductor, Shielded
- XLP Insulation, PVC Jacket
- 100% or 133% Insulation Level
- Copper Conductor
Application:
For use in power circuits up to 5KV when installed in open air, conduit, duct, or direct buried in earth, in wet and dry locations. Used for applications in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. UL approved for use at 90°C for continuous operation, 130°C for emergency overload conditions, and 250°C for short circuit conditions.
Conductors:
Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8 (compressed) or ASTM B-496 (compact), with a semi-conducting conductor shield.
Insulation:
Cross-linked polyethylene (XLP) per ICEA S-97-682 with a semi-conducting insulation shield.
Shield:
Shielding wires meet ICEA standards.
Jacket:
Sunlight-resistant PVC per ICEA S-97-682 and UL Standard 1072.
Additional Standards:
- ICEA S-93-639
- NEMA WC74
- AEIC CS8
- Federal Specification J-C-30B
Note:
CT rating must be requested. CT ratings are available on sizes 1/0AWG and larger.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.