Power Cable - 500 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
Select gauge from drop-down menu for prices:
- Power Cable - Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 2 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 1/0 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 2/0 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 4/0 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 250 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 350 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 750 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
- Power Cable - 1000 Gauge Unishield 5KV/8KV UL Type MV-105 Single Conductor, Shielded EPR Insulation, CPE Jacket 5KV 133%, 8KV 100% Insulation Level Copper Conductor
Technical Specifications: | |
Size (AWG or kcmil): | 500 |
No. of Strands | 37 |
Insulation Thickness (Mils): | 115 |
Jacket Thickness (Mils): | 80 |
Insulation Diameter (Inch): | 1.03 |
Drain Wire Size AWG | 17 |
Conductor Diameter (Inch): | 0.74 |
Overall Diameter (Inch): | 1.24 |
Net Weight | 2015 |
Specifications:
- HW 204
- Power Cable - Unishield
- 5KV/8KV UL Type MV-105, 105°C
- Single Conductor, Shielded
- EPR Insulation, CPE Jacket
- 5KV 133%, 8KV 100% Insulation Level
- Copper Conductor
Application:
For use in power circuits up to 8KV when installed in open air, conduit, duct, cable tray when CT rated, or direct buried in earth, in wet and dry locations. Used for critical applications in harsh and caustic environments in chemical plants, refineries, steel mills, industrial plants, commercial buildings, utility substations and generating stations. UL approved for use at 105°C for continuous operation, 140°C for emergency overload conditions, and 250°C for short circuit conditions.
Conductors:
Compact soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-496, with a semi-conducting conductor shield.
Insulation:
Ethylene propylene rubber (EPR) per ICEA S-97-682.
Shield:
Six (6) corrugated copper shield wires longitudinally embedded in an exterior semi-conducting CPE jacket per ICEA S-97-682.
Jacket:
Sunlight-resistant CPE per ICEA S-97-682 and UL Standard 1072.
Flame Tests:
IEEE 383 70,000 BTU/hr flame test – CT-listed sizes 1/0AWG and larger
Additional Standards:
- ICEA S-93-639
- NEMA WC74
- AEIC CS8
Note:
CT rated on sizes 1/0 AWG and larger.